Jacket Finntrail MUDWAY 2000 Camogrey

Article: 2000
0 Reviews
169 USD
Color:
Camogrey
Select Size:
Free shipping worldwide on orders over 290 $ / €
100% Secure Transactions
1 year warranty
Jacket Finntrail MUDWAY 2000 Camogrey
The stylish jacket provides a high degree of water and mud protection. The jacket has four spacious pockets with water-resistant zippers: two chest slip pockets equipped with special protecting flaps and two inside pockets for personal belongings. It has a walkie-talkie shoulder fastener and 3M reflective elements. Thanks to a special flap with a magnetic closure system, the main zipper is mud-resistant. The hood can be easily rolled down and hidden inside the collar when needed. Adjustable inner cuffs protect against water ingress inside the sleeves. The jacket is made of a durable three-layer fabric with a HARD-TEX membrane. All technologies used in this model ensure long service life and comfort. The jacket is equipped with an elastic belt with YKK buckle, a collar with fleece trim, an elastic drawstring.
Specification
Color:
Camogrey
Model:
Mudway
Waterproofness:
15 000 mm
Membrane layer:
3
Breathability:
7000 g./m2/24h
Features
Reliable mud-resistant fabric protector
Durable membrane fabric
Membrane fabric with multi-layer lamination
3M reflective elements
0 Reviews
Most of users rate this product as exellent. You may write your own review below:
What is the difference between waders with built-in boots and stockingfoot waders?

Waders with built-in rubber boots have been used by off-road riders by habit and due to lack of alternatives. They have several drawbacks though, especially for off-road riders. Rubber boots do not support the ankle. Also, if you are stuck in a swamp, it’s much easier to pull your waders out when you are in stockingfoot waders, because they are fixed with the boots on the ankle, and are more lightweight then waders with built-in rubber boots.
Stockingfoot waders are much more common and reliable now, and they have plenty of advantages over the waders with built-in rubber boots:

  • Built-in neoprene socks. 4mm neoprene socks with glued seams and a reinforced insole provide comfort and protection. They should be worn with wading boots.
  • Proper ankle support. Unlike rubber boots, wading boots provide proper ankle support, so the chance of injury is minimized.
  • Lightweight. In terms of comfort and weight, wading boots are comparable to trekking boots. After a full day of riding,  there will be no fatigue.
  • Mobility. Since legs are well fixed in wading boots, it is easier to walk in sticky swamps or mud, and it is easier to pull your feet out if you get stuck.
  • Durability and protection.Variations and design. In addition to all of the practical advantages, you can choose boots with a cool design to match your style.

For off-road riders, especially hardcore riders, stockingfoot waders feel much more comfortable than rubber boots.

How do I choose the right waders?

There are several factors to consider. All membrane waders are durable, lightweight and breathable, so they are comfortable at any time of the year. 

Please remember to wear thermal underwear as a base layer for the membrane to work most effectively.  Thermal underwear keeps you comfortable by transferring moisture away from the skin.
We like to divide gear by type of riding:

  • If you plan to ride from time to time and don’t plan to overcome hard off-road obstacles, Wademan waders will be enough. They are made of a durable 4-layer fabric with a HARD-TEX membrane and have a minimum of seams, especially on the inside of the legs.
  • If you prefer hardcore riding, take a look at Enduro waders. They are made of a durable five-layer HARD-TEX membrane from the feet to the waist. Also consider Aquamaster waders. They have no cross seams on the inside of the legs, and are reinforced with a durable five-layer HARD-TEX membrane. Both choices have a minimum of seams on the inside of the legs, so they are more resistant to wear.
  • We also have waders with zdirt resistant zippers: durable and technologically advanced Speedmaster-Z and Aquamaster-Z which provide incomparable comfort in the moments when you need to do the deed.

Waders with built-in rubber boots are quite popular, but waders with wading boots are technologically advanced, safe and comfortable and are becoming more popular nowadays because of their advantages. So, think twice when buying waders — make a right choice.

Why should I wear underwear and of what kind?

In most of cases, all the problems with sweating during the ride are associated with cotton under your gear. The fact that you sweat is normal, but wearing cotton under the membrane is a mistake.

A membrane is made for gear to "breathe". It allows air to flow inside out and sweat to evaporate, while not letting outside moisture come inside. If pure cotton is worn as thermal underwear, the water and sweat path ends there. Because cotton is an absorbent material, it holds everything that the skin emits and makes it uncomfortably moist inside the gear.

It is very important to put on a proper thermal layer that does not retain moisture under the membrane. It also doesn't have to be 100% synthetic. Blended fabrics with a minimum amount of synthetic fibers (even 20%) may work. In general, the less cotton, the better the moisture wicking quality is though. This also includes the top and bottom of the gear, and socks.

For the cold season, use additional insulated thermal underwear as a second layer after the base layer thermal clothes — a fleece is a good choice.

How should I store my gear? Are there any rules?

Our blog comes in handy. Learn more in How to store gear. This short article covers all the questions on the topic.

Do I need to order any accessories?

Base layer thermal underwear is the trickiest thing. Riders usually think they don’t need it in summer. The thing is, you need it not to warm yourself but to control thermal insulation and proper sweat evaporation. It is made specifically to be worn under waders and jackets as the first layer. The same goes for thermal socks.

Waterproof bags and backpacks are must-have for your belongings and dry clothes.

Waterproof smartphone pouch will protect your phone from water. With a waterproof pouch you can take shots under the water or use your smartphone without needing to clean your hands every time you use it.

Gloves provide extra comfort when riding ATVs and UTVs, and keep your hands dry and protected from sharp twigs and stones.

Check the accessorise page to find all the necessary and handy things to complete your off-road warrior set.

How should I clean my gear? Are there any rules?

This is a pretty tricky question. We talk about it in detail in our blog. Learn more in our short article How to clean gear after riding.

How do I choose the right size?

We have an easy-to-read sizing chart to help you find your size.  Men’s and Women’s sizing is shown there.  If you choose the boots for a woman, choose one size smaller boots, as 8 men US size boot equals 9 US for women.
If you still have any questions, feel free to use the site chat or contact us by email shop@finntrail.com

How can I pay for my order?

We accept the following payment methods:

  • Visa
  • Mastercard
  • PayPal

Credit card information is always encrypted for a secure purchase.
If needed, you can request for an invoice in order to make payment directly to our bank account.

Is my credit card charged as soon as I submit my order?

Yes, your credit card will be charged when you place your order, and the products in your order will be reserved for you. If your credit card is declined, your order will become void and you will be sent an email confirming this. Please check the status of your order or try another card and place the order again if your order is voided. Also, please, do not hesitate to contact us by email shop@finntrail.com with every question you have.

If my order is submitted on the FINNTRAIL site, does that mean that all of the items I ordered are available?

Our online inventory numbers are synced many times per day, and most orders are fulfilled promptly after submission, as you would expect. However, if timing is such that an item did happen to sell out just before you submitted your order, we will get in contact with you (usually by email), and inform you of the situation.

What shipping options do you offer?

Nowadays we offer standard ground shipping which is free of charge for orders over 290 USD/EUR. For orders under 290 USD/EUR the shipping cost is 25 USD or 20 EUR.

Delivery time varies by location.
Please, contact us by shop@finntrail.com if you want your order to be shipped with another shipping method.

Can you ship the order to another address?

Yes, but please note that the billing address and the name on the credit card has to match that of the customer for the order.

How can I return or exchange my order?

If you are not satisfied with your order, you can return it for a refund or exchange it. Find more info at the returns and exchanges page.

How can I become a dealer?

Just visit the dealers page and you will find all the information about a partnership with us.

You can also contact us by email if you want to discuss the terms of cooperation with us shop@finntrail.com

Thank you for choosing FINNTRAIL

one small step for man, one giant leap for off-road mankind

HOW TO TAKE CARE OF MEMBRANE GEAR
WASHING

Like everything, gear loses its useful properties with each wash. Try to minimize the number of washes and the gear will last a long time.

Clean your gear from adhering dirt and rinse under running water.

Washing by hand: To remove minor impurities, it is enough to use ordinary soap, a soft bristle brush or a sponge.

In a washing machine:
  • “Membrane fabric” or “Hand wash" mode in cold water with a thorough rinse.
  • Use only special detergents for membrane fabrics (do not use laundry detergents, conditioners and bleaches)
  • do not wring
  • do not use dry cleaning
DRYING
  • After washing turn the gear inside out and hang it to dry in a well-ventilated area.
  • After drying the inside, turn it inside out again and leave it to dry completely.
  • Do not dry gear near bonfires, heaters and in direct sunlight.
PROPER STORAGE

If possible, store the gear flat, upright, in a dry and ventilated area

Use clothing covers to protect the membrane from dust. The dust clogs the membrane structure and "blocks" breathing.

Pay attention to creases: do not leave them during storage. Creases can damage protective layers, which lead to micro cracks on it and decrease effectiveness of gear.

MALE
FEMALE
1. Height
Measure it standing straight with your back against a wall. From the floor to the top of your head.
2. Chest girth
Measure under armpits, straight across fullest part of chest.
3. Waist girth
Measure your waist circumference at the narrowest part. Keep the tape a finger or two loose.
4. Hips girth
Measure your hips at the fullest point, standing with feet together.
5. Inseam
Measure from crotch to desired end of pants.
6. Sleeve
Bend your elbow and place hand on hip. Measure from center of back of your neck, along shoulder and down around the elbow to the wrist.
US
EU
Choose system of units is displaying in spreadsheet
jacket or thermal lining size
Jacket and thermal lining sizing is the equivalent to your real clothing size. To calculate it, you should measure your chest and waist grith, weight yourself and check your height.
US
EU
Size (US)
xxs
xs
s
m
l
xl
xxl
xxxl
Height (cm)
155-165
160-170
165-175
170-180
175-185
180-190
185-195
190-200
Chest girth (cm)
80-84
84-88
88-92
96-100
100-104
108-112
116-120
124-128
Waist girth (cm)
70-74
74-78
78-82
86-90
90-94
98-102
106-110
114-118
Hips (cm)
82-86
86-90
90-94
98-102
102-106
110-114
118-122
126-130
Inseam (cm)
68-71
71-77
74-80
77-83
80-86
83-89
86-92
89-95
Sleeve (cm)
53-57
55-59
57-61
59-63
61-64
63-65
64-67
65-69
Height (in)
61"-65"
63"-67"
65"-69"
67"-71"
69"-73"
71"-75"
73"-77"
75"-79"
Height (feet)
5'1"-5'5"
5'3"-5'7"
5'5"-5'9"
5'7-5'11"
5'9"-6'1"
5'11"-6'3"
6'1"-6'5"
6'3"-6'7"
Chest girth (in)
31" -33"
33"-35"
35"-36"
38"-39"
39"-41"
43"-44"
46"-47"
49"-50"
Waist girth (in)
28"-29"
29"-31"
31"-32"
34"-35"
35"-37"
39"-40"
42"-43"
45"-46"
Hips (in)
32"-34"
34"-35"
35"-37"
39"-40"
40"-42"
43"-45"
46"-48"
50"-51"
Inseam (in)
27"-29"
28"-30"
29"-31"
30"-33"
31"-34"
33"-35"
34"-36"
35"-37"
Sleeve (in)
21"-22"
22" - 23"
22"-24"
23"-25"
24"-25"
25"-26"
25"-26"
26"-27"
1. Height
Measure it standing straight with your back against a wall. From the floor to the top of your head.
2. Chest girth
Measure under armpits, straight across fullest part of chest.
3. Waist girth
Measure your waist circumference at the narrowest part. Keep the tape a finger or two loose.
4. Hips girth
Measure your hips at the fullest point, standing with feet together.
5. Inseam
Measure from crotch to desired end of pants.
6. Sleeve
Bend your elbow and place hand on hip. Measure from center of back of your neck, along shoulder and down around the elbow to the wrist.
US
EU
Choose system of units is displaying in spreadsheet
jacket or thermal lining size
Jacket and thermal lining sizing is the equivalent to your real clothing size. To calculate it, you should measure your chest
and waist grith, weight yourself and check your height.
US
EU
size (US)
xxs
xs
s
m
l
Height (cm)
150-160
155-165
160-170
165-175
170-180
Chest girth (cm)
80-84
84-88
88-92
92-96
96-100
Waist girth (cm)
60-64
64-68
68-72
72-76
76-80
Hips (cm)
86-90
90-94
94-98
98-102
102-106
Inseam (cm)
69-75
72-78
75-81
78-84
81-87
Sleeve (cm)
52-56
54-58
56-60
58-62
60-64
Height (in)
59"-63"
61"-65"
63"-67"
65"-69"
67"-71"
Height (feet)
4'11"-5'3"
5'1"-5'5"
5'3"-5'7"
5'5-5'9"
5'7"-5'11"
Chest girth (in)
31" -33"
33"-35"
35"-36"
36"-38"
38"-39"
Waist girth (in)
24"-25"
25"-27"
27"-28"
28"-30"
30"-31"
Hips (in)
34"-35"
35"-37"
37"-39"
39"-40"
40"-42"
Inseam (in)
27"-30"
28"-31"
30"-32"
31"-33"
32"-34"
Sleeve (in)
20"-22"
21" - 23"
22"-24"
23"-24"
24"-25"
Subscribe to our newsletter
I agree to the Privacy Policy